Views: 35 Author: Site Editor Publish Time: 2020-12-04 Origin: Site
Composition and purpose of wire cable taping machine
This wire cable taping machine is suitable for fire-resistant mica tapes of fire-resistant wires and cables. It is mainly composed of pay-off frame, wire wheel, winding head, traction wheel, wire take-up device and motor.
Preparation before production of wire cable taping machine
1. Put tools and measuring tools on the workbench and check whether the measuring tools are zero.
2. Check whether the cable taping machine is normal, if there is any abnormality, report to the maintenance personnel for repair immediately.
3. Prepare semi-finished products and materials according to the production plan, and check whether the semi-finished products and materials are qualified by experience and meet the process requirements, and install the qualified copper wire on the pay-off rack, and adjust the tension.
4. Hang the gears according to the wrapping pitch required by the process, and select the wrapping mold according to the process requirements.
5. According to the process requirements, install the mica tape on the winding head according to the number of wrapping layers, adjust the tension of the mica tape, and pull the mica tape winding guide rod to the front of the mold in turn.
6. Prepare the take-up reel as required, check whether the reel is in good condition, and install the take-up reel on the take-up rack.
7. After the traction wire is looped through the traction wheel, fix one end of the traction wire on the take-up reel, and pull the other end to before the wrapping mold.
Operation points of wire taping machine
1. Pull the copper wire through the threading guide wheel, the winding head, and the wire die to the winding die, pass through the wire die, connect the copper wire core and the traction wire together, and then stick the mica tape on the copper wire core. Then turn it on slowly, wait for the thread end to pass the meter wheel to return the meter counter to zero, and stop when the winding wire is pulled to the take-up reel, cut off the unqualified part of the thread, and pull out the traction line to fix the qualified thread On the online disk.
2. Check whether the pitch meets the requirements, whether the wrapping is uniform, whether there is looseness, burrs, etc., and then continue to produce after confirming that it is correct.
3. During the start-up process, always observe the winding quality and the winding condition of the winding reel. If any defects are found, the wire must be returned to the winding head to ensure that the number of winding layers meets the requirements.
4. After the manufacturing is completed, carefully fill in the product manufacturing card and place it in the area to be inspected. After the process inspector passes the verification and signs, place the qualified product area to be transferred.