Precautions for plastic extruder machine

The plastic extruder machine can be matched with various plastic molding auxiliary machines such as pipe, film, holding material, monofilament, flat wire, packing belt, extruded net, plate (sheet) material, profiled material, granulation, cable coating, etc. This kind of plastic extrusion molding production line produces all kinds of plastic products. When using cable extrusion machine. What should I pay attention to?

Precautions for plastic extruder machine

1. The wire extrusion machine should be placed in a ventilated position to ensure that the working heat of the motor is dissipated and its life span is prolonged; the machine should be well grounded.

2. Regularly check the tool screws. After using the new machine for 1 hour, use tools to tighten the screws of the movable knife and the fixed knife to strengthen the fixation between the blade and the knife holder; lubricate the bearings regularly to ensure the lubrication between the bearings In order to ensure the sharpness of the cutting tool, the tool should be checked frequently to ensure its sharpness and reduce unnecessary damage to other parts caused by the blunt blade; regularly check whether the belt is loose and tighten it in time.

3. Restart. Before the second start, remove the remaining scraps in the machine room to reduce the starting resistance. The inertia cover and pulley cover should be opened regularly to clear the ash outlet under the flange, because the crusher room discharges powder The material enters the shaft bearing.

4. When replacing parts and cutting tools, the gap between the movable knife and the fixed knife: 0.8MM for crushers above 20HP is better, 0.5MM for crushers below 20HP is better. The thinner the recycled material, the gap can be adjusted appropriately.