What are the preparations before the production of the mica tape machine

Mica taping machine is suitable for fire-resistant mica tapes for fire-resistant wires and cables. It is mainly composed of pay-off frame, wire wheel, winding head, traction wheel, wire take-up device and motor.

Preparation before production

1. Put the tools and measuring tools on the workbench and check whether the measuring tools are zero.

2. Check whether the equipment is normal, if it is not normal, immediately report to the maintenance personnel for repair.

3. Prepare the semi-finished products and materials according to the production plan, and check whether the semi-finished products are qualified by experience and meet the process requirements. The qualified copper wire is allowed to be installed on the pay-off rack and the tension is adjusted.

4. Hang the gear according to the wrapping pitch required by the process, and select the wrapping mold according to the process requirements.

5. According to the process requirements of the mica tape, install the mica tape on the winding head in turn according to the number of wrapping layers, adjust the tension of the mica tape, and pull the mica tape winding guide rod to the front of the mold in turn.

6. Prepare the take-up reel as required, check whether the reel is in good condition, put it in the take-up reel and install it on the take-up rack.

7. Pull the traction line around the traction wheel for 3-4 times, fix one end of the traction line on the take-up reel, and pull the other end to before the wrapping mold.