Views: 128 Author: Site Editor Publish Time: 2021-11-23 Origin: Site
The stranding machine is also called the high speed stranding machine, the bunching machine, and the nimble threading machine.
The stranding machine is widely used in the stranding of various soft/hard conductors (copper wire, enameled wire, tinned wire, copper clad steel, copper clad aluminum, etc.) and electronic wires, such as power cords, telephone wires, audio cables, Video cable, car cable, network cable, etc. Twist multiple single conductors into one strand to achieve wire technology.
Next, let's look at the technical characteristics of high-speed cable stranding machine:
1. The spindle speed of the wire stranding machine can reach 3000rpm.
2. Automatic tension control: When twisting the wire, the tension of the wire taking-up must continue to increase when the full wire is received from the bottom of the plate. The machine can automatically track and adjust the tension of the wire; make the tension of the whole wire uniform, and at the same time this machine It can also adjust the tension without stopping the machine.
3. Three compression devices are installed in the machine to ensure the roundness of the conductors after stranding and reduce the loss of insulating materials.
4. The main engine is lubricated by oil and cooled by natural circulation, which effectively prolongs the service life of the spindle bearing. The thread passing system adopts a new structure, the wire passes directly from the main shaft guide wheel to the bow belt, minus the scratches and jumps caused by the failure of the corner guide wheel on the aluminum plate.
5. The whole machine adopts synchronous belt transmission, there is no lubrication point in the machine, the machine body is kept clean, the stranded wire is free of oil, and it is suitable for conductor stranding of various wire types with higher surface cleanliness requirements.
6. To adjust the twisting pitch, only need to replace one take-off wheel, and adjust the twisting direction only to turn the reversing rod, which is simple and convenient to operate, thereby reducing the error rate and work intensity of the operator. The bearings of the whole machine are selected from well-known Japanese brands, and the bow straps are made of new materials, which are flexible, and avoid jumps caused by vibration during high-speed operation. The frequency converter, PLC, magnetic powder clutch, electromagnetic brake, hydraulic jack, etc. are all selected imported well-known brands , Reduce failure rate and maintenance cost.