Plastic scorch in extrusion machine: Plastic scorch is a common quality defect in plastic extrusion.The notes are as follows: the temperature shows too high; there is a lot of smoke and a strong irritating smell at the nose-die mouth, and in serious cases, there is a bursting sound; the extruded pla

An extruder is one of the main pieces of equipment for industrial wire harness, cable production, for the production of plastic extrusion, for the production of cable shells, the use of an extruder can well help us to enhance cable production efficiency, but the process of using extruder equipment w

Cable wire in the field of extrusion machine terminology is extrusion. Plastic granulation is also known as extrusion molding or flame-retardant plastic, in recycled rubber is also known as pressed out. It means that the raw material, according to the efficacy between the extruder barrel and the ext

1. Screw elementsThis design's advantage depends on the exhaust port's natural pressure so that the raw material is not discharged. There is an exhaust port for the extruder provisions of the 2-stage screw. There are two exhaust ports must be a 3-stage screw. Each stage has a natural pressure sectio

An extrusion machine, also known as an extruder, is a commonly used equipment in the production of wire and cable, mainly for the process of extrusion in the production of cables wires can be applied to a wide range of types of cable production, including power cables, coaxial cables, communication