Mica taping machine is used to wrap the wrapping tape (mica tape, aluminum foil tape, paper tape) on the wire and cable core. It is one of the equipment for producing fireproof cables, control cables, communication cables and so on. The model has advanced design, scientific and reasonable configurat

Principle of wire extruder machine: Plastic extrusion equipment is widely used for processing pipes, rods, monofilaments, plates, films, wire and cable coatings, and similar profiles.The working principle of the cable extrusion machine is to melt and plasticize the solid plastic under the premise of

The compression strength of coil tapping machine tape is not good enough. The key reasons are:1. The temperature of the extrudate is too low;2. Too much grease overflows;3. The production angular velocity is too fast, so that the sheath is extremely fast refrigerated;4. The temperature of the water

Matters needing attention when mica taping machine worksThe wire tapping machine is divided into single-layer, double-layer, and three-layer wrapping. The wrapping tape (mica tape, tissue tape, aluminum foil, polyester film, etc.) is rotated on the turntable and wrapped on the core wire. The mica ta

TaiZheng is teh leading bunching machine manufacturer in China, offers wire buncher machines, many customers want to extend the life of the machine and create more profits, so we must develop the maintenance of the machine in our daily work. Now, let's talk about the installation and maintenance of

Electrical connection problems between copper bars, aluminum bars, copper and aluminum cables, and wiring terminals are often encountered in corporate or civil power transmission lines. In these connections, as long as the two ends of the joint are made of two different materials, copper and aluminu

Taizheng is the leading plastic extruder supplier in China, offers plastic extrusion machines. Next, Taizheng introduces the characteristics of plastic extrusion machines1. Modularity and specializationModular production of plastic extrusion machine can adapt to the special requirements of different

Plastic extrusion machine is widely used in the plastic processing industry Nearly 20 years ago, the plastic extrusion machine as we know it is usually done manually. People are struggling to put the pellets into the hopper of the plastic extrusion machine into bags or boxes from a certain place. Ho

The twisting machine is the main equipment for the production of power cables, plastic cables, and rubber cables in the wire and cable factory. The wire twisting machine is a complete set of equipment for manufacturing four-core and five-core plastic, cross-linked cables and armor with a cross-secti